Newberry Tanks & Equipment, LLC

Flameshield® Manufactured with a tight-wrap double-wall design, standard features include 2-hour fire-tested performance and built-in secondary containment. STI Flameshield® & Southwest Research Institute identification labels. STI-Flameshield®: Built to STI & UL 142 standards Primary & secondary tanks that can be tightness tested onsite Support designs available for all seismic requirements Compatible with a wide range of fuels and chemicals, including biodiesel and ethanol Available with either saddle or skid support configurations Low cost compartments and customization Compliance Made Simple with Newberry With a 90-year proven track record and the fastest delivery in the U.S., Newberry’s STI FlameShield® and STI-F921® Tanks are certified to the Steel Tank Institute (STI/SPFA) specifications. Which means our production is subject to Independent Quality Control Inspections, and your tank is eligible for an Extended Warranty.

Steel Construction and Mobile Ready. Newberry offers single and double wall Aboveground Skid Tanks that meet UL-142 specification for Aboveground Storage of Flammable and Combustible liquids. They are commonly used for fuel storage and lubricant oil storage. Double-wall skid tanks are considered heavy duty aboveground storage, convenient for secondary containment requirements. Standard with one coat of gray primer Optional colors and coatings are available On Demand & Fastest Delivery in the U.S. With a 90-year proven track record in the industry and the fastest delivery in the U.S. Newberry offers tanks on demand, competitive freight rates, and third-party fulfillment via ‘Newberry Direct’ to expedite your need for durable steel tanks.

All Steel Construction. Newberry offers single and double wall tanks that meet UL-142 label for Aboveground Storage of Flammable and Combustible Liquids. They are commonly used for petroleum fuel and lubricant oil storage. Dual-wall tanks provide a solution for secondary containment requirements.Standard with one coat of gray primer Sizes up to 30,000 gallons available On Demand & Fastest Delivery in the U.S. With a 90-year proven track record in the industry and the fastest delivery in the U.S. Newberry offers tanks on demand, competitive freight rates, and third-party fulfillment via ‘Newberry Direct’ to expedite your need for durable steel tanks.

Single wall, standard construction small tanks are often used for farm, irrigation, and other non-commercial uses.

Multiple Tank Lines, Equipment Packages and Distribution We offer multiple lines of single and dual-walled rectangular storage tanks from 120 to 1,000 gallon capacity. These tanks can be paired with our diverse line of pumps, reels, meters and equipment to address every oil dispensing need. Unique features include custom paint packages, optional casters that provide valuable mobility. Combine these features with our product durability, fast lead times, and competitive freight rates, and you will see why we believe we have the right bulk oil package that can and will do the job for you. Third Party Fulfillment and Distribution We offer some of the fastest delivery and most competitive freight rates in the industry. This unique geographic advantage when combined with our E-commerce portal ‘Newberry Direct’ gives Newberry the ability to provide complete third party fulfillment and distribution services to national accounts.

Newberry’s Steel Construction. Single wall or double wall standard construction fire pump fuel system tanks. Tanks and opening are built, tested, and labeled per UL-142 Standard NPT fittings and leg bracket configuration as specified. Exterior red oxide primer. On Demand & Fastest Delivery in the U.S. With a 90-year proven industry track record and the fastest delivery in the U.S. Newberry offers tanks on demand, competitive freight rates, and third-party fulfillment via ‘Newberry Direct’ to expedite your need for durable steel tanks.

Increase Performance. Save on Costs. With Kleerwater™ Revolutionary for the Oil/Water Separator Industry, Kleerwater’s patented coalescer “ball” design increases performance while saving on costs. Highest quality effluent 5 PPM per UL-2215 Twice as efficient as parallel plate separators - Twice as efficient as parallel plate separators - Provides superior oil/water separation to meet stormwater runoff regulations - Rigidly adhere to UL-58, UL-142, UL-1746 - Meet strictest State and Federal mandates under the Resource Conservation and Recovery - Act and Clean Water Act - Produces higher efficiency performance flow rates, thereby reducing installation costs. - Simple, routine maintenance with no confined entry space!

When assembly is an issue, Newberry offers Turnkey Packages! As well as one-stop shopping for options you require. With a 90- year proven industry track record and the fastest delivery in the U.S.*, Newberry also offers competitive freight rates and third-party fulfillment via ‘Newberry Direct.’ Cylindrical Tank Package: We offer fuel tank packages that ship assembled and ready for use. The tank package comes standard with a liquid level gauge, leak detection gauge, emergency vents, atmospheric vent, fill cap, pump, hose, and nozzle. Rectangular Tank Package: We offer lube tank packages that ship assembled and ready for use. The tank package comes standard with a level gauge, leak detection gauge emergency vents, atmospheric vent, fill cap, pump, mounted hose reel, and meter.

Obround tanks are space saving tanks for lubricant and motor oil dispensing. Tanks come standard with 6″ or 19″ rise brackets. Both tanks and tank packages are available. Pre-assembled tank packages are an efficient way to dispense bulk lubricants. Tank packages save time and expense associated with lubrication equipment installation.

PERMATANK® double-wall jacketed underground storage tank features an inner steel tank coupled with an exterior corrosion-resistant fiberglass tank. A unique standoff material separating the inner and outer tanks creates a uniform interstitial space ensuring rapid and accurate leak detection. PERMATANK® Features: - Meets UL 58, UL 1746 and ULC-S603.1 - Proven tight throughout installation by 13 inches Hg minimum interstitial vacuum test - Options to meet EPA leak detection requirements for interstitial monitoring - Steel provides compatibility with all blends of ethanol and biodiesel fuels - Impermeable to petroleum products and vapors - Meets EPA Leak Detection Requirements - Designed shorter than an all-FRP tank of the same capacity - Capacities range up to 30,000 gallons

Standard Features: Thermally insulated Double-Wall Fire-Protected Aboveground Storage Tanks conform with the following standards and code requirements: - UL 2085 standard for insulated secondary containment aboveground tank - Built to UL 142, NFPA 30 & 30A Codes - IFC and CARB Standing Loss Control air emissions - STI Standard F941 for Thermally Insulated Aboveground Storage Tanks - Rectangular and Vertical Construction Available Fireguard® Optional Features: - Single or double bulkheads for internal compartments - Emergency Vents - Fueling system equipment (remote overfill, gauges, pumps, pump platforms, canopies, spill containment, ladders) - Optional exterior and internal coatings - Support designs available for seismic compliance - TurnKey solutions for assembly and installation - Enhanced Ballistics Resistance in accordance with UL 752 Level 9

Vertical Tanks Available in single-wall and double wall, meet UL-142 specifications for above-ground storage of flammable and combustible liquids. Single- and Double- wall tanks provide a solution for secondary containment requirements. All tanks are prepared with one coat of gray primer. API Tanks Newberry’s custom-designed vertical tanks are constructed to API 12F specification oil field tanks in capacities from 100 to 500 barrels and API 650 specification petroleum storage tanks. Vertical Tanks On Demand & Fastest Delivery in the U.S Vertical Tanks With a 90-year proven track record in the industry and the fastest delivery in the U.S. Newberry offers tanks on demand, competitive freight rates, and third-party fulfillment via ‘Newberry Direct’ to expedite your needs.

Matt Kohnke President & Chief Operating Officer A savvy and accomplished leader who fosters a collaborative and progressive approach, Matt Kohnke joined Newberry Tanks in 2020. His duties at Newberry include oversight of the company’s lean manufacturing process to ensure optimization, quality, and employee safety, as well as meeting customer needs such as Newberry’s expedited delivery options. Matt possesses 17 years’ experience as a senior executive at manufacturing and distribution companies, having most recently served as CFO of Freight Car America, and previously at Dorman Products. Matt began his career at Arthur Andersen in the assurance practice. His lauded track record includes a reputation for value creation by launching measures to streamline functions and improve overall output. Matt has a BS from Villanova, which means he’s a dedicated Wildcat during basketball season. He’s also a certified baseball ​and basketball referee. He has two grown sons and lives in Memphis with his wife, Stephanie.

James Fischer Vice President of Sales Prior to joining Newberry Tanks & Equipment in late 2018, James served as a highly effective Director of Sales for Electric Guard Dog LLC, an asset protection company that is today the single largest supplier of commercial electric security fences in the U.S. During his tenure, EGD became an “Honor Roll” member of the Inc. 5000 List of America’s Fastest Growing Private Companies, with 5 rankings on the list over a period of 6 years. The company was also named “Dealer of the Year” in 2016. James previously led business development at State Systems Inc, where he achieved top sales awards three years running and successfully grew the company’s first aid and safety division from a start-up to operating in three territories. James attended Tennessee Tech University, where he played collegiate football, and currently lives in Collierville, TN with his wife Laura Rae, and their four kids.

Brian Brinkley Vice President/General Manager Brian has been with Newberry Tank for 29 years, overseeing daily operations of production, finishing, and shipping through three different management teams while maintaining Newberry’s long history of dedication to quality and delivery. Brian graduated From Arkansas State University with a Bachelor’s Degree in Business Administration. He currently lives In Marion Arkansas with wife Karen and two daughters.

John Whittington Director of Engineering John has been with Newberry Tanks since 2019. He came on board initially as a senior project engineer working on finishing and assumed responsibility for Newberry Engineering early in 2020. John has worked in manufacturing in various roles from manufacturing and product engineering to production and plant management over the last 30 years. John has focused on product finishing, both liquid and powder coating, machining, fixturing, and welding. He has worked for manufacturing and fabrication companies in both make to stock and make to order environments. John graduated from Hendrix College with a Bachelor’s in Physics, and Vanderbilt University with a Bachelor’s in Mechanical Engineering. John lives in Marion, Arkansas, with his wife and two children.

Chris Powell Plant Manager – Memphis An accomplished veteran with over 30 years of experience, Christopher got his start in the United States Marine Corps as a Logistics Specialist. He then progressively expanded on his experience in logistics and production. He positively added to the operations of companies such as General Motors, Delphi Automotive Systems, ABB, and Mitsubishi Electric prior to joining Newberry Tanks in 2020. Christopher has taken charge of the Newberry Memphis plant with focus on production and customer satisfaction with a continuous improvement mindset. Christopher lives in Hernando, MS with his wife, Amy. They share 3 sons, a daughter, and 4 grandchildren.